The IMU-based tilt compensation in Reach RS3 enables you to make measurements with up to 60 degrees of tilt while still staying within 20 mm of accuracy.
Reach RS3 continuously measures and corrects tilt in real-time to keep you on target.
We calibrate the inertial measurement unit in each device individually at the factory, so you can get your GNSS unit up and running right out of the box.
Unaffected by magnetic fields, RS3’s GNSS and IMU sensors provide robust tilt compensation even when working close to metal structures.
Tilt initialization takes about 20 meters of walking or 10-20 seconds of tilting. Usually ready on the way from the car.
Work in RTK with VRS or a single baseline CORS network. You
can also connect another GNSS GPS receiver as an NTRIP base using Emlid NTRIP Caster.
Compatibility
Any receiver with RTCM3 support
Perfect for areas with no internet coverage for NTRIP. LoRa is used when connecting Emlid GNSS receivers over the radio.
CompatibilityAll Emlid receivers
with built-in radio
An option to mix and match RTK receivers within your fleet. You can configure your Reach RS3 to receive corrections from an existing base*.
You can also use a high-power external radio on your Reach base and connect with the UHF radio receiver in Reach RS3.
CompatibilityBases with radios that
transmit TRIMTALK 450S**
*Requires a 410-470 MHz
antenna, sold separately
**TRIMTALK is a trademark
of Trimble Inc.
Emlid Flow efficiently manages all field-related tasks, including receiver configuration, RINEX logging, data collection, and stakeout.
The basic features are available for free to all users. Upgrade your Emlid Flow and Flow 360 with a single subscription.
Tilt CompensationBase and rover setupCodingPoints, lines, and polygonsInverse & TraverseWMS layersDTM supportStakeout reportsCSV, DXF, SHP, and KML126 x 126 x 142 mm
950 g
RS3 is waterproof up to a one meter depth. Silicone plugs completely seal and protect all connectors from water and dust.
The Reach RS3 Li-Ion battery handles high and low temperatures well and over 2000 cycles of charging and discharging while maintaining its original capacity.
While others are hot-swapping batteries, your RTK GPS device just keeps working.
We extensively tested Reach RS3 in conditions that simulate the coldest winters and hottest summers.
The body of the Reach RS3 GNSS receiver is impact-resistant, drop-resistant, and ready for the harshest conditions.
RM42.00 – RM12,100.00
